该厂位于广东东莞，地处亚热带季风气候区，常年气候湿润，夏季炎热漫长，冬季温和短暂。全年平均湿度较高，尤其在雨季，空气湿度常维持在80%以上，四季温差虽不极端，但夏季高温可达35℃以上，秋冬季亦常有返潮现象。这样的气候条件，对仓储环境中的温湿度控制提出了较高要求。

该企业主要从事金属与塑钢类小型工业品壳体与支架的生产。其厂房为多层钢筋混凝土结构标准厂房，墙面设有玻璃窗用于自然采光。周转仓库位于一楼，面积约500平方米，主要用于半成品的中转与暂存。其中，金属类半成品多为未喷涂状态，表面直接暴露在空气中。在高温高湿环境下，金属表面易吸附水汽，发生电化学反应，导致氧化锈蚀，不仅影响产品外观，也可能降低材料强度，造成潜在质量损失。因此，有效控制仓库内的温度与湿度，对保障半成品存储质量至关重要。

瑞峰环保制冷的方案设计团队综合考虑了多项关键因素：

1、地理气候环境：针对东莞地区夏季高温高湿、冬季易返潮的气候特点，需选用具备降温与除湿双重能力的设备；

2、库房结构特性：该仓库为密闭性较好的室内空间，适合采用内循环气流组织方式，避免外界湿热空气持续侵入；

3、空间布局限制：仓库面积有限，为节约地面使用面积，决定采用吊挂式安装，不占用仓储及作业区域；

4、送风需求匹配：空间规模适中，无需远距离送风，因此选用轴流机型，可实现高效、直接的气流输送；

5、环境控制要求：需同时实现温度调节与湿度控制，确保存储环境稳定。

基于以上分析，我们最终为其设计并安装了大功率吊挂式工业轴流省电空调系统。该机型具备强效制冷与独立除湿功能，运行稳定，能效突出，尤其适合中小型仓储空间的环控需求。

工程完工后，设备迅速投入运行，成效显著：

仓库温度稳定控制在26℃以下，湿度保持在60%左右，有效抑制了金属表面的凝露与氧化；

室内空气流通均匀，无死角闷热现象，半成品存储环境得到根本性改善；

设备运行噪音低，吊挂式设计不影响仓库日常操作与货物周转，获得厂方一致好评。

此次虽为小型仓库工程，但充分体现出瑞峰环保制冷在通风降温方案设计中的专业性与适应性。我们不仅擅长高大厂房、车间等大型空间的温控系统设计，同样专注于中小型场所如仓储间、配电房、实验室等环境的精准环控解决方案。

瑞峰环保制冷——以专业设计守护每一处空间的舒适与安全。

The factory is located in Dongguan, Guangdong Province, in the subtropical monsoon climate zone. The climate is humid all year round, with hot and long summers and mild and short winters. The average humidity throughout the year is relatively high, especially during the rainy season, where the air humidity often remains above 80%. Although the temperature difference between the four seasons is not extreme, the high temperature in summer can reach over 35 ℃, and there is often a phenomenon of moisture regain in autumn and winter. Such climatic conditions place high demands on temperature and humidity control in storage environments.

This enterprise mainly engages in the production of metal and plastic steel small industrial product shells and brackets. The factory building is a standard multi story reinforced concrete structure, with glass windows on the walls for natural lighting. The turnover warehouse is located on the first floor, with an area of approximately 500 square meters, mainly used for the transfer and temporary storage of semi-finished products. Among them, metal semi-finished products are mostly in an unpainted state, with the surface directly exposed to the air. In high temperature and high humidity environments, metal surfaces are prone to adsorb water vapor and undergo electrochemical reactions, leading to oxidation and corrosion. This not only affects the appearance of the product, but may also reduce the strength of the material, resulting in potential quality loss. Therefore, effectively controlling the temperature and humidity inside the warehouse is crucial to ensuring the quality of semi-finished product storage.

The design team of Ruifeng Environmental Protection Refrigeration has comprehensively considered multiple key factors:

1. Geographical climate environment: In response to the high temperature and humidity in summer and the tendency to regain moisture in winter in Dongguan, equipment with dual cooling and dehumidification capabilities should be selected;

2. Warehouse structural characteristics: This warehouse is an indoor space with good airtightness, suitable for using internal circulation airflow organization to avoid continuous invasion of humid and hot air from the outside;

3. Space layout limitation: The warehouse area is limited, and in order to save ground usage area, it has been decided to adopt hanging installation without occupying storage and operation areas;

4. Matching of air supply requirements: The space scale is moderate and there is no need for long-distance air supply. Therefore, axial flow models are selected to achieve efficient and direct airflow delivery;

5. Environmental control requirements: Temperature regulation and humidity control must be achieved simultaneously to ensure a stable storage environment.

Based on the above analysis, we ultimately designed and installed a high-power suspended industrial axial flow energy-saving air conditioning system for it. This model has powerful cooling and independent dehumidification functions, stable operation, outstanding energy efficiency, and is particularly suitable for the environmental control needs of small and medium-sized storage spaces.

After the completion of the project, the equipment was quickly put into operation with significant results:

The temperature in the warehouse is stably controlled below 26 ℃, and the humidity is maintained at around 60%, effectively suppressing condensation and oxidation on the metal surface;

Indoor air circulation is uniform, with no dead corners or stuffiness, and the storage environment for semi-finished products has been fundamentally improved;

The equipment has low operating noise and the hanging design does not affect the daily operation and turnover of goods in the warehouse, which has received unanimous praise from the factory.

Although this is a small-scale warehouse project, it fully demonstrates the professionalism and adaptability of Ruifeng Environmental Protection Refrigeration in the design of ventilation and cooling solutions. We are not only skilled in the design of temperature control systems for large spaces such as high-rise factories and workshops, but also focus on precise environmental control solutions for small and medium-sized environments such as warehouses, power distribution rooms, laboratories, etc.

Ruifeng Environmental Protection Refrigeration - With professional design, we safeguard the comfort and safety of every space.